double bass tuner

An online double bass tuner analyzes the sound captured by your microphone and shows whether each open string is flat, sharp, or in tune. Tune your double bass, also called a contrabass or upright bass, directly in your browser with this free chromatic tuner: allow microphone access, play one open string, and follow the indicator until it stays centered.

This page is designed for standard four-string double bass tuning in fourths: E, A, D and G from the lowest string to the highest.

To tune your instrument, allow microphone access when your browser asks.

Reference pitch: 440 Hz

Reference frequency used for tuning

Your instrument is in tune. Start playing.

Once your instrument is in tune, continue with Metronaut’s interactive sheet music and professional accompaniments. Slow down the tempo, transpose a piece, repeat difficult passages in a loop and get feedback on whether you are playing the right notes.

How to read the double bass tuner

The diagram compares the three main tuner states. Match the displayed note to the open string you are tuning, then adjust until the cursor stays centered.

Online tuner showing flat, in tune and sharp pitch states
  • Play an open string

    Play one open string at a time and check that the displayed note matches the string, from lowest to highest: E, A, D, or G.
  • Centered means in tune

    The string is in tune when the cursor stays centered while the sound remains steady.
  • Cursor on the left: pitch too low

    The string sounds lower than the target note. Keep the sound stable, then turn the tuning machine slowly to raise the pitch.
  • Cursor on the right: pitch too high

    The string sounds higher than the target note. Keep the sound stable, then turn the tuning machine slowly to lower the pitch.
  • If the wrong note appears

    Mute the other strings and play a sustained open note again. Strong overtones or a short low note can make the display jump; bowing steadily or plucking clearly can help the tuner lock onto the fundamental.

How to tune a double bass with the online tuner

  • 1

    Prepare a clean low note

    Choose a quiet place, keep the device microphone uncovered, and play one open string at a time. Bowing creates a long, steady signal; a clear pizzicato note also works if you let the tuner reading settle.
  • 2

    Start with A

    Tune the A string first, continue with D and G, then finish with E.
  • 3

    Turn the tuning machines slowly

    Double bass strings are adjusted with the geared tuning machines on both sides of the pegbox, below the scroll. Make small turns, play the string again, and stop if the tension feels unusual.
  • 4

    Give the low strings time to settle

    The E and A strings can respond more slowly than D and G. Hold the note long enough for the indicator to stabilize before making another correction.
  • 5

    Approach the target gradually

    If the pitch passes the target, lower it slightly and approach the note again with small turns. This makes the final adjustment easier to control.
  • 6

    Recheck all four strings

    Changing the tension of one string can slightly affect the others. Recheck E, A, D and G before you start practicing.

Tune each double bass string

The diagram identifies the four strings at the tuning machines. Standard four-string double bass tuning runs in fourths from lowest to highest: E, A, D and G.

Tune one open string at a time. Start with A, continue with D and G, then tune E and recheck all four strings.

Standard double bass string notes

  • E string

    E is the lowest standard four-string double bass string. Play a sustained note and wait for the low-frequency reading to settle before adjusting again.
  • A string

    A is the usual first reference in lessons, rehearsals and ensembles. Tune it first, then compare the neighboring strings.
  • D string

    D sits between A and G. Turn the tuning machine in small steps and let the note stabilize after each correction.
  • G string

    G is the highest standard double bass string and usually responds faster than E or A.

Double bass-specific tuning tips

  • Keep the instrument stable

    Set the endpin securely and tune from a stable playing position. Place the device where its microphone can hear the instrument without putting it under the bridge or near moving parts.
  • Protect the strings

    Double bass strings carry substantial tension. Raise the pitch gradually and stop if a string feels unusually tight or a tuning machine resists.
  • Listen beyond the attack

    The first instant of a plucked note contains strong overtones. Let the note ring briefly and adjust from the steadier part of the tuner reading.
  • Recheck after climate changes

    New strings, travel, temperature and humidity can shift double bass tuning. Check the instrument again after it has adjusted to the room.
  • Watch the bridge

    Large tuning changes can pull the bridge toward the fingerboard. If it looks tilted, stop and ask a teacher or luthier to inspect it instead of forcing it back.
  • Account for extra low strings

    A five-string double bass may add a low B string, while a C extension lowers the E string to C. Tune those extra notes after the standard E-A-D-G setup and follow the instrument maker or teacher's guidance.

Double bass tuner questions