guitar tuner

An online guitar tuner analyzes the sound captured by your microphone and shows whether each open string is flat, sharp, or in tune. Tune your acoustic, electric or classical guitar directly in your browser with this free chromatic tuner: allow microphone access, play one open string, and follow the indicator until it stays centered.

This page is designed for standard six-string guitar tuning. From string 6 to string 1, the open notes are low E, A, D, G, B and high E.

To tune your instrument, allow microphone access when your browser asks.

Reference pitch: 440 Hz

Reference frequency used for tuning

Your instrument is in tune. Start playing.

Once your instrument is in tune, continue with Metronaut’s interactive sheet music and professional accompaniments. Slow down the tempo, transpose a piece, repeat difficult passages in a loop and get feedback on whether you are playing the right notes.

How to read the guitar tuner

The diagram compares the three main tuner states. Match the displayed note to the open guitar string you are tuning, then adjust its machine head until the cursor stays centered.

Online tuner showing flat, in tune and sharp pitch states
  • Play an open string

    Starting with string 6 (low E), play one open string at a time. Continue through strings 5 to 1 and check that the tuner shows E, A, D, G, B, then E.
  • Centered means in tune

    The string is in tune when the cursor remains centered while the note rings steadily.
  • Cursor on the left: pitch too low

    The string sounds lower than the target note. Turn the matching machine head slowly to raise the pitch.
  • Cursor on the right: pitch too high

    The string sounds higher than the target note. Turn the matching machine head slowly to lower the pitch.
  • If another note appears

    Mute the other five strings and pluck again with a clear, moderate attack. Let the initial attack pass so the tuner can settle on the string's fundamental pitch.

How to tune a guitar with the online tuner

  • 1

    Prepare a clean open-string sound

    Remove any capo, choose a quiet place, and keep the device microphone uncovered. Select a clean tone on an electric guitar; place an unplugged electric guitar close to the microphone or play through a clean amp at low volume.
  • 2

    Start with string 6 (low E)

    Pluck string 6 (low E), the thickest string, and check that the tuner shows E. Then tune strings 5 through 1 in order: A, D, G, B and high E.
  • 3

    Pluck one string at a time

    Mute the other strings and pluck with a pick, thumb or finger. A firm but controlled attack gives the tuner a clearer note than striking the string very hard.
  • 4

    Turn the matching machine head slowly

    Make small adjustments and play the string again after each turn. Machine-head direction varies between guitars, so follow whether the detected pitch moves toward the target instead of relying on a fixed turning direction.
  • 5

    Recheck all six strings

    Changing one string's tension can slightly affect the others. Check E, A, D, G, B and E again, then play a familiar chord to confirm that the guitar sounds balanced.

Tune each guitar string

The diagrams identify each open string by number and note at the headstock. Guitar strings are numbered from the highest-pitched string to the lowest: string 1 is high E and string 6 is low E.

A simple tuning order runs from string 6 to string 1: low E, A, D, G, B and high E. Recheck all six strings when finished.

String numbers and notes on a guitar headstock with three tuning machines on each side.
String numbers and notes on a guitar headstock with all six tuning machines on the left.

Standard guitar string numbers and notes

  • String 6 — Low E

    This is the thickest string and the lowest open note in standard guitar tuning. Let it ring briefly before adjusting so the tuner can settle.
  • String 5 — A

    String 5 is tuned to A. Mute the neighboring strings while checking its pitch.
  • String 4 — D

    String 4 is tuned to D. Make small tuning-machine adjustments and pluck it again after each change.
  • String 3 — G

    String 3 is tuned to G. It is the last wound string on many acoustic and electric sets, although string construction varies.
  • String 2 — B

    String 2 is tuned to B. The interval from G to B is a major third rather than a perfect fourth.
  • String 1 — High E

    This is the thinnest string and the highest open note. Raise its pitch carefully because thin strings respond quickly to small turns.

Guitar-specific tuning tips

  • Expect new strings to stretch

    Fresh steel or nylon strings often go flat while they settle. Tune them repeatedly, stretch them only as recommended for the string type, and recheck before playing.
  • Approach the note gradually

    If you pass the target pitch, lower the string slightly below it and approach the note again. This helps reduce slack around the nut and tuning post.
  • Keep the capo off while tuning

    Tune the open strings before fitting a capo unless a piece specifically requires another procedure. Recheck gently after placing the capo because excess pressure can pull notes sharp.
  • Separate tuning from intonation

    If open strings are centered but fretted notes or chords still sound out of tune, the guitar may need its intonation, nut or action checked by a teacher or guitar technician.
  • Account for guitar and string type

    Acoustic, electric and classical guitars share standard E-A-D-G-B-E tuning, but nylon strings usually take longer to settle and an unplugged electric guitar may need to sit closer to the microphone.
  • Change alternate tunings carefully

    This chromatic tuner can detect notes for Drop D and other alternate tunings, but large tension changes may require a suitable string gauge or professional setup. Follow the tuning required by the piece.

Guitar tuner questions